MMS
MMS
[Specs]
DIMENSIONS
Dryer dimensions (W×D×H):
1–3 chambers: 33.14 x 24.64 x 68.34 inches
6 chambers: 61.10 x 24.64 x 68.34 inches
Max. dimensions with open door (W×D×H):
1–3 chamber: 33.14 x 42.91 x 68.34 inches
6 chamber: 61.10 x 42.91 x 68.34 inches
ENVIRONMENT
Working temperature:
50-82.4°F relative humidity from 30% to 60% w/o condensation
Storage temperature:
-68–129.2°F relative humidity 10% to 85% w/o condensation
POWER
Required connection (Europe):
50-82.4°F relative humidity from 30% to 60% w/o condensation
Power cable length:
-68–129.2°F relative humidity 10% to 85% w/o condensation
Voltage:
1–3 chambers: 230V AC (210-250V AC)
6 chambers: 2x 230V AC (210-250V AC)
Frequency:
50-60 Hz
Max.power consumption of the device without
additional accessories:
1–3 chambers: 230V AC (210-250V AC)
6 chambers: 2x 230V AC (210-250V AC)
TEMPERATURES
Operating technology
Dry air (actively dried)
CONNECTION
Communication:
WiFi, LAN, USB
DRYING
Operating technology:
50-82.4°F relative humidity from 30% to 60% w/o condensation
Drying chamber space (W x D x H):
-68–129.2°F relative humidity 10% to 85% w/o condensation
Drying chamber volume:
1–3 chambers: 230V AC (210-250V AC)
6 chambers: 2x 230V AC (210-250V AC)
Number of material slots in one chamber:
50-60 Hz
Number of chambers in the dryer:
1–3 chambers: 230V AC (210-250V AC)
6 chambers: 2x 230V AC (210-250V AC)
Maximum filament spool diameter:
220 mm
Maximum thickness of the spool:
90 mm
Material tracking system:
Smart Material Manager
Third party materials:
Yes, optional
Drying process settings:
Predefined
Recrystallization process settings:
Predefined
Build Volume
380 x 380 x 20 mm (60 648m³)
Printing System
Dual Extruder Equipped with purging station
Filament Diameter
1.75 mm
Model Materials
PLA, ABS, ABS-ESD, ASA, PA6, PA-CF, LEXAN, PC, PC-ABS, PC-CF, PEKK-CF, ULTEM 9085, PEEK, PEKK, PEEK AERO, VICTREX AM™ 200
Support Materials
Breakaway support material, soluble support material ESM-10 - for removing the ESM-10 you need solvent and support dissolving system
Material Chamber
4 bays with automatic spool change
Nozzle Temperature (max.)
500°C
Buildplate Temperature (max.)
180°C
Chamber Temperature (max.)
195°C (active heating)
Filament Chamber Temperature (max.)
50°C
Software
3DGence SLICER 4.0, 3DGence CLOUD
Additional Accessories
Advanced filtration unit,
UPS - emergency power supply, signal tower
SOFTWARE
Device monitoring and archiving:
3DGence CLOUD, 3DGence CONNECT™
Software updates:
Auto Update via LAN, WiFi; USB
CONSTRUCTION
Construction:
Freestanding, equipped with castor wheels
Frame:
Steel
Doors:
Sealed/Thermally Insulated
Electronics:
3DGence
NFC TAG Reader:
Yes, on the front of the device
Display;
10'' TFT capacitive display with 1280 x 768 px resolution
SAFETY
Doors:
Mechanical lock with key, door opening sensor, over temperature protection acc. to DIN 12880 class 1.0, class 3.1
ACCESSORIES
Print recrystalization kit (optional)
Dessicant agent cartridges (one for each drying chamber)
Drawers for storing materials in the drying chamber (one for each drying chamber)
WiFi adapter
Power adapter 1x 3ph 400V 32A / 3x 1ph 230V 32A (for connecting additional 3 chambers)